Software for ProLiant Manual

i. Click OK. Your new proxy settings are saved and you are returned to the Automatic Update
Settings dialog box. Click Cancel to return to the Automatic Update Settings dialog box, if
you do not want to enter the proxy server settings. The configuration you specified appears in the
wizard.
j. When the upload task completes, view the Log to confirm that all of the ProLiant and Integrity
Support Packs and components were successfully uploaded to the VCRM.
6. Click Reset to return the settings back to the previous settings, Back to return to the previous page, or
Cancel to abort the operation. If you have enabled the automatic update feature, the connection is
tested at this time. If an error occurs, the settings are not saved, and you remain on the automatic update
settings page to correct any errors.
7. Click Finish. Your changes are saved successfully. Click Close, and you are returned to the VCRM
Homepage.
Related topics
• Uploading support packs
• Viewing a custom software baseline
Uploading support packs
This feature enables you to browse for HP ProLiant and Integrity Support Packs on drives and CDs accessible
to your local system, and have those ProLiant and Integrity Support Packs copied into the Version Control
Repository directory.
NOTE: You can install ProLiant Support Packs from the HP SmartStart CD. Refer to “Updating the repository”
to learn how to update the repository from the HP SmartStart CD.
NOTE: This feature is only supported on the Internet Explorer browser, and you must have configured your
security settings to allow downloading and installing the Version Control Upload (ActiveX) Control.
NOTE: For information regarding Microsoft Internet Explorer Security Settings, refer to “Configuring Internet
Explorer settings”.
To upload a ProLiant or Integrity Support Pack:
1. Click the Home tab. The Home page appears.
2. Click the Upload a Support Pack link. The HP ProLiant and HP Integrity Support Pack page
appears.
a. To select a folder that contains ProLiant and Integrity Support Packs, click Browse and select
directories that contain ProLiant and Integrity Support Packs you would like to upload into the
repository. The Select HP ProLiant and HP Integrity Support Pack Folders dialog box appears.
Note: You might have to browse to subdirectories to find the ProLiant or Integrity Support Pack for
which you are searching.
b. A checkbox appears next to any folder containing the ProLiant or Integrity Support Pack. Select
the folders to include the desired paths in the upload list. Click OK. The Upload HP ProLiant and
HP Integrity Support Packs page appears.
Note: When the Upload HP ProLiant and HP Integrity Support Packs page appears, a Security
Warning dialog box might display alerting you that a component that has access to their file system
is being installed on the system. If this Security Warning dialog box appears, click Yes to install
the component. If you do not want to install the component, which is required to upload the ProLiant
and Integrity Support Packs, click No.
3. Verify that you want the selected ProLiant or Integrity Support Packs uploaded to the VCRM, and click
Upload to begin copying the files to the VCRM's repository directory.
Note: Before you click Upload, you can deselect any ProLiant and Integrity Support Pack shown to
remove it from the list, and it will not be uploaded.
4. After clicking Upload, the Upload Progress section appears. The Current Task field, located in the
Upload Progress section, refers to the file that is being uploaded. The Progress bar indicates the status
of the file that is currently being uploaded. You can click Cancel to abort the upload process. If you
22 Navigating the software