Software for ProLiant Manual
click Cancel, a message appears asking you if you are sure you want to cancel the operation. Click
OK, and the upload is canceled as soon as the current task is completed.
Note: The Progress bar, located in the bottom of the browser window, indicates the status of the task
currently being executed, while the one in the Upload Progress section shows the overall progress for
all files being uploaded.
5. After the upload is complete, click Close to close the upload window and refresh the VCRM display.
Note: The upload task is complete when the files have been transferred from the local system to the
VCRM. For performance reasons, transferred files are queued for cataloging as a separate activity at
the VCRM server, meaning that upon completion of the upload, not all of the files will immediately
appear in the catalog, and uploaded ProLiant and Integrity Support Packs may be marked as invalid
until all files have been cataloged, usually within a few minutes.
Related topics
• Viewing a custom software baseline
• Viewing recently added HP ProLiant and HP Integrity Support Packs
• Configuring auto update
Creating a custom software baseline
The
HP Version Control Repository Manager
(VCRM) enables you to create
Custom Software Baselines
based
on the selected software components or
HP ProLiant and Integrity Support Packs
.
NOTE: You can also create a support pack from the Home or Catalog page.
To create a Support Pack from the Home page:
1. Click the Home tab. The Home page appears.
2. Click the Create a Custom Software Baseline link. The Create a Custom Software Baseline page
appears.
Note: The Create a Custom Software Baseline link is also available from the Catalog tab.
a. In the Operating System field, select the appropriate operating system from the dropdown menu.
b. In the Name field, enter a name for the Software Baseline, for example, ACME Reference
Software Set for Database Servers.
c. In the Version field, enter the version for the Software Baseline, for example, 1.0.0.
d. In the Languages field, enter a list of languages for the Software Baseline, for example, English,
French, or German.
Note: if you plan to install or deploy this custom baseline with HP Remote Deployment Utility, you
must enter the correct
English
language name of the language. For example, if you want the target
system to use the Japanese language, enter Japanese. Entering just English with a leading
capital E will allow the custom baseline to be deployed to any system with the HP Remote
Deployment Utility.
e. In the Description field, enter a description for the Software Baseline.
3. Click Next. Click Reset to clear you entries or Cancel to abort the wizard.
4. Select the desired components or Support Packs to be part of the Support Pack. Click Next. Click Cancel
to abort the wizard, Back to return to the previous page, or Reset to clear the selections.
5. To modify the Support Pack contents:
a. In the section that displays the contents, select the desired component, then click Delete, Move
up, or Move down.
b. Repeat step 5a until all components are in the desired order.
Note: Make sure the components are ordered correctly, so they will install. When ordering the
components in a Custom Software Baseline, HP recommends that they be ordered as follows: drivers
first, then services, then utilities or agents.
Home 23