Owner's manual

• Thermal Status displays the temperature status of the drive system. The following values are
possible:
◦ OK - The temperature is within normal operating range.
◦ Degraded - The temperature is outside of normal operating range. Make sure the cover
is on the storage system.
◦ Failed - The temperature is outside of normal operating range, and could permanently
damage the system. Ensure that the fans are spinning and check the room temperature.
◦ Unknown - The Storage Agents do not recognize the thermal status. You may need to
upgrade your software.
◦ No Temperature Monitoring - This storage system does not support temperature monitoring.
If the storage system uses Target Based Management (TBM), the following information with
regards to the storage box management will be displayed.
• Initiator SAS Address displays the SAS address of the initiator connected to the drive box.
• Target SAS Address displays the SAS address of the target (i.e. the drive box itself).
• Primary Controller IP Address displays the management IP address for the storage box primary
controller.
• Connection Status displays the drive box connection status. The following values are valid:
Connected - The storage system is connected.◦
◦ Not Connected - The storage system is disconnected.
◦ Not Supported - Reporting this storage system's connection status is not supported.
◦ Unknown - The Storage Agent is unable to determine the storage system's connection
status. You may need to upgrade your software.
iSCSI Storage Connections
Select an iSCSI Instance entry from the Storage list to display instance and portal information and
a submenu containing separate entries for Node, Session, and Connection information. The
following items may be displayed:
• iSCSI Instance Information
• Session Information
• Connection Information
iSCSI Instance Information
Select an iSCSI Instance entry from the Storage list to display details about that iSCSI instance.
Instance Information
• Description displays a description of the iSCSI instance. If there is only a single instance this
may be N/A.
• iSCSI Version displays the version of the iSCSI specification supported by this instance.
• Vendor Name displays the name of the manufacturer of the implementation of this instance.
• Vendor Version displays the manufacturer version of the implementation of this instance.
• Number of Sessions displays the number of currently open sessions that are associated with
this instance.
• Number of Portals displays the number of available portals that are associated with this
instance.
102 Agent information