Owner's manual

Advanced Memory Protection
This section displays the following information about the Advanced Memory Protection sub-system.
• Advanced Memory Protection Status—Displays status of the Advanced Memory Protection
sub-system. The following states are supported:
• Other—The system does not support Advanced Memory Protection or the Management Agent
cannot determine the status.
• Not Protected—This system supports Advanced Memory Protection but the feature is disabled.
• Protected—The system supports Advanced Memory Protection. The feature is enabled but not
engaged.
• Degraded—The system was protected, but the Advanced Memory Protection has been engaged;
therefore Advanced Memory Protection is no longer available.
• DIMMECC—The system is protected via DIMM ECC only.
• mirrorNoFaults—The system is protected by Advanced Memory Protection in the mirrored
mode. No DIMM faults have been detected.
• mirrorWithFaults—The system is protected by Advanced Memory Protection in the mirrored
mode. One or more DIMM faults have been detected.
• hotSpareNoFaults—The system is protected by Advanced Memory Protection in the hot spare
mode. No DIMM faults have been detected.
• hotSpareWithFaults—The system is protected by Advanced Memory Protection in the hot spare
mode. One or more DIMM faults have been detected.
• xorNoFaults—The system is protected by Advanced Memory Protection in the XOR memory
mode. No DIMM faults have been detected.
• xorWithFaults—The system is protected by Advanced Memory Protection in the XOR memory
mode. One or more DIMM faults have been detected.
• advancedEcc—The system is protected by Advanced Memory Protection in the Advanced
ECC mode.
• Advanced Memory Protection Types Available—Displays the options available.
• XOR—This system is configured for Advanced Memory Protection using the XOR engine.
• Mirrored memory with dual memory boards—This system is configured for Mirrored Advanced
Memory Protection within a dual memory board configuration. The mirrored memory may be
swapped with memory on the same memory board or with memory on the second memory
board.
• Mirrored Memory within a single memory board—This system is configured for Mirrored
Advanced Memory Protection within a single memory board.
• Advanced ECC—This system is configured for the Advanced ECC type of Advanced Memory
Protection
• Mirrored (deprecated)—This system is configured for Mirrored Advanced Memory Protection
• Online Spare—This system is configured for Online Spare Advanced Memory Protection.
• Advanced Memory Protection Type Active—Displays the currently active type of Advanced
Memory Protection based on the types available. The following connection states are supported:
• Other—The Management Agent cannot determine the Advanced Memory Protection fault
tolerance. You may need to upgrade your software.
• None—This system is not configured for Advanced Memory fault tolerance.
128 Agent information