Software Owner's manual

Upgrading incompatible firmware modes and versions
If unsupported VC Domain firmware versions are detected at the end of a VCEM 6.3 upgrade, a
warning message similar to the following is displayed:
VCEM detected unsupported VC firmware. For information on how to upgrade your firmware, run the Insight Software
Advisor or refer to the VCEM User Guide troubleshooting section.
Upgrade to a supported VC firmware by performing the following steps:
1. Select the VC Domain with an incompatible status and click VC Domain Maintenance.
2. Upgrade the managed VC Domains to the minimum VCEM supported VC firmware version.
See the HP Insight Software Support Matrix or “Installation prerequisites” (page 17) for the
VCEM supported VC firmware versions.
3. Click Complete VC Domain Maintenance to close the operation.
4. Upgrade the VC Domain Group firmware mode to the minimum VCEM supported VC firmware.
For more information, see “Upgrading VC Domain Group firmware mode” (page 66).
Performing post-installation configuration tasks 21