Software Owner's manual

Figure 21 Enhanced SNMP configuration
Do not configure the VC Domain using the enhanced SNMP configuration. If necessary, disable
the enhanced SNMP configuration by following these steps:
1. Do not configure more than five SNMP trap destinations.
2. Verify that all SNMP trap destinations follow these rules:
a. The Destination Name must be in the following format:
<IP Address of the SNMP Trap Destination>_<Community
String>_<0 for VC-Enet and 1 for VC-FC>
(for example, 192.168.1.1_public_1)
b. Select the “ipv4” option.
c. Set the SNMP trap format to “SNMPv1.”
Figure 22 Adding or editing a compatible SNMP trap destination
d. To disable trap severities, from the Add a SNMP Trap Destination page, click
Advanced, as shown in the following figure.
Requirements for adding a VC Domain to a VC Domain Group 39