Software Owner's manual
NOTE: The following information is sample base VC Domain configuration data.
• Domain settings
Configuration for double density servers (for example, BL2x220c)◦
◦ Configuration for full-height and half-height single density servers (for example, BL460c,
BL480c)
◦ Login Banner Configuration
• Network Access Groups
◦ Name(s) and networks
• Ethernet settings
MAC Cache Failover:◦
– Enable Fast MAC Cache Failover
– MAC Refresh Interval
◦ IGMP (Internet Group Management Protocol) Snooping:
Enable IGMP Snooping–
– IGMP Idle Timeout Interval
◦ Server VLAN Tagging Support:
Tunnel VLAN Taggings or Map VLAN Taggings–
– Force server connection setting
◦ Multiple Network Speed Settings:
Preferred Link Connection–
– Preferred Link Connection Speed
– Maximum Link Connection
– Maximum Link Connection Speed
◦ Network SNMP settings:
Enable SNMP–
– Read Community
– System Contact
– Each SNMP trap defined community and IP address
◦ Port Throughput Statistics
◦ Network Loop Protection
◦ VLAN Capacity
– Legacy VLAN capacity or Expanded VLAN capacity
• Fibre Channel SAN fabric settings:
Enable SMI-S◦
◦ Fibre Channel SNMP settings:
– Enable SNMP
– Read Community
52 Managing VC Domains