Software Owner's manual

Part Number (WWPN) and Logical Unit Number (LUN) are required only for the primary and
secondary SAN boot.
NOTE: For the profile initializing on the remote volume, you need an operating system
previously configured in the volume.
11. (Optional) Select FCoE Connections. The server profile editor displays the default FCoE
connections based on the available number of HP VC FlexFabric10 GB/24-port modules.
New FCoE connections must be added at the end of this list and can only be removed from
the last connection to the first connection. If the maximum number of FCoE connections is
reached, an error message is displayed.
NOTE: If there are no SAN fabrics using the HP VC FlexFabric 10 Gb/24-port module uplink
ports, the FCoE connections can be configured as unassigned.
12. You can create a single server profile, or multiple server profiles. To create a single server
profile, select Single Profile as displayed in the following figure:
Figure 38 Selecting a server profile option
You can either leave the profile unassigned or click Select Location to make an assignment.
A table is displayed allowing you to select a domain and enclosure and also select the bays
you want associated with the profile. Click OK to create the profiles and a profile list is
displayed. Click OK to accept the assignments.
13. In addition to creating a single server profile, you can create multiple profiles at the same time
and decide to leave a number of profiles with an unassigned status, or assign those server
profiles to bays. Choose from one of the multiple server profile options:
1. Select Assign server profiles to specific server bays and click Select Location to make the
assignments. A window opens allowing you to select a domain and enclosure and all
Creating a server profile 79