Software Owner's manual

2. For firmware versions 3.3x and later:
Figure 42 6.3.1 Server VLAN tag to vNet Mappings window
a. In the Ethernet connections table expand the network name menu and select Multiple
Networks. The Server VLAN tag to vNet Mappings window appears.
b. You can select a name or use the filter to sort by either Contains or Is.
c. You can filter also networks by the following attributes:
• Name
• Shared Uplink Set
• VLAN Id
• Color
• Label
d. Click the Force same VLAN mappings as Shared Uplink Set check box to enable or disable
it depending on your base configuration.
e. Click the right-arrow to add the network to your configuration˙.
f. Click OK to save the configuration.
Configuring Network Port Speed
When creating or editing a server profile, you can configure the network speed of an Ethernet
network connection. You can select network speeds of 1Gb, 2Gb, 4Gb, and 8Gb, or Auto.
Configuring Network Port Speed 83