Installation and Upgrade Guide

Installing the G06.24 RVU
G06.24 Software Installation and Upgrade Guide—528593-005
5-14
Build and Apply the New Software Revision
When the Build information is assembled, the Build/Apply Request dialog box is
refreshed. It displays default options and assigns a name to the Build/Apply
request. For example:
Note. You might receive this message:
The message is warning you that the last DSM/SCM snapshot was created by a pre-T6031D46
version of DSM/SCM, which would be the case if you have not installed the T6031D46 product
version. If you are certain that you are on a D46 PVU of DSM/SCM, ignore the message and
continue with the G06.24 installation. If you are unsure of the DSM/SCM product version, logon
to the Target Interface (TI) by running ZPHITI (page 5-19
). The current version of TI appears
on the logon screen.
If you know that you have activated the D46 DSM/SCM product version, click OK and continue
with the installation.
If you have previously installed the D46 DSM/SCM PVU and created a snapshot, the error
message does not appear.