Installation and Upgrade Guide

Updating Service Processor (SP) Firmware
G06.24 Software Installation and Upgrade Guide—528593-005
7-9
Update SP Firmware Using the TSM Service
Application
3. Using the Service Processors (SPs) list, determine which fabric (X or Y) contains
the secondary master service processor. (You must choose this fabric when you
begin updating service processor firmware):
•
If an asterisk appears on the line for GRP-1.MOD-1.SLOT-50, then the Y fabric
contains the secondary master service processor; choose the Y fabric for the
remaining steps in this procedure.
•
If an asterisk appears on the line for GRP-1.MOD-1.SLOT-55, then the X fabric
contains the secondary master service processor; choose the X fabric for the
remaining steps in this procedure.
4. Select Display>Firmware update.
The Firmware Update dialog box appears.
5. From the Resource Type list, select Service Processors, Y-side if you have
chosen to update the service processors in the Y fabric, or Service Processors,
X-side if you are updating the service processors in the X fabric.
6. From the Display list, select All to display the selected resources in the Available
area.
7. Click Add all to move the resources to the Selected box.
8. Click Specify other to display the Specify Firmware File Location dialog box.
VST645.vsd