Installation and Upgrade Guide

Updating Service Processor (SP) Firmware
G06.24 Software Installation and Upgrade Guide—528593-005
7-23
Firmware Update for Fabric Side-Y (Using OSM)
(Under Resource Name, the SP that has initially been updated displays a grey
checkmark beside it. The other SP, awaiting update, displays a yellow question
mark.)
11. To verify that firmware updates are in progress, select Action Summary. The
Action Status Summary window appears with information about recent actions,
including their status and their overall progress.
The SP Firmware Update Progress bar keeps track of the number of SPs that pass
the firmware update. When all the selected SPs have completed the firmware
update, the Passed column displays the number of SPs that are successfully
updated.
12. You are then asked to reset each SP. For example, to reset SP 2.1.55:
The firmware update needs to reset the Service Processor
to activate the updated firmware. Would you like to
reset the Service Processor?
13. Select Yes.
The number of SPs that are currently being updated appear in the Running column
under SP Firmware Update Progress. For example:
The message is displayed for all SPs that must be reset.
14. To verify that firmware resets are in progress, select Action Summary. The Action
Status Summary window appears with information about recent actions, including
their status and their overall progress. For example:
vst945.vsd
VST966.vsd