Installation and Upgrade Guide

Updating Service Processor (SP) Firmware
G06.24 Software Installation and Upgrade Guide—528593-005
7-24
Firmware Update for Fabric Side-X (Using OSM)
The Reset Progress bar keeps track of those SPs that pass the firmware reset.
When all the selected SPs have completed the reset, the Passed column displays
the number that are successfully reset. (A green checkmark replaces the grey
checkmark by the SP under Resource Name in the SP Firmware resource list).
Firmware Update for Fabric Side-X (Using OSM)
1. From the Filter by list, select the appropriate filter, Logical:Fabric Side-X. The
following message appears:
Changing a required filter results in your
selections being cleared.
Do you still wish to change the filter?
2. Click OK.
3. Click Add All to add the SPs you want to update to the lower list.
4. Click Perform action.
5. Click OK when the Confirm SP Firmware Update dialog box appears.
The SP-Parameter Input dialog box appears.
Note. You can begin this procedure for updating the X-side by using Remove All to delete the
resources for the Y-side update. All the steps are the same, except the change filter message
is not displayed and Step 2 is unnecessary.)