Installation and Upgrade Guide

Updating Processor Boot Code
G06.24 Software Installation and Upgrade Guide—528593-005
8-13
Using TSM, Update the Processor Boot Code and
Issue a Hard Reset or Equivalent
11. Monitor the status of the processor boot code update in the Firmware Update
Action Summary dialog box. For example:
When the action status appears as Completed, the processor boot code update is
finished.
12. Repeat Steps 2 through 11 to update the Processor Boot Code, X-side.
The Firmware Update Action Summary dialog box should confirm that all
processor boot millicode for all PMF CRUs has been updated successfully. For
example:
13. Close the Firmware Update and Firmware Update Action Summary dialog boxes.
14. You must now reset the processors. See Reset the Processors To Complete
Updating the Processor Boot Code (Both for OSM and TSM) on page 8-16.
VST729.vsd
VST740.vsd