Installation and Upgrade Guide

Updating Processor Boot Code
G06.24 Software Installation and Upgrade Guide—528593-005
8-14
Using OSM, Update the Processor Boot Code and
Issue a Hard Reset or Equivalent
Using OSM, Update the Processor Boot Code and Issue a Hard
Reset or Equivalent
You can use OSM to update processor boot code, provided that you use the Hard
Reset or Prime for Reload action option. This action can be done at the end of the
procedure or when performing a system load.
1. Log on to the OSM Service Connection.
2. Select Display> Multi-Resource Actions. The Multi-Resource Actions dialog box
appears with unselected fields.
3. From the Resource Type list, select SP.
4. From the Action list, select Processor Boot Millicode Firmware Update.
5. From the Filter by list, select Logical: Fabric Side-Y:
6. Click Add All to move the selected resources to update the lower list.
7. Click Perform Action.
8. Click OK when the Confirm Processor Boot Millicode Firmware Update dialog box
appears.
The Processor Parameter Input dialog box appears.
9. Enter the file location. Use the $volume.subvolume.filename
($SYSTEM.SYSnn) subvolume created during the most recent DSM/SCM
Build/Apply and click OK. For example:
$system.sys02.cpucode9
As the firmware update is performed, information about it appears in the Progress
List.
VST938.vsd
VST956.vsd