Installation and Upgrade Guide

Updating Processor Boot Code
G06.24 Software Installation and Upgrade Guide—528593-005
8-15
Using OSM, Update the Processor Boot Code and
Issue a Hard Reset or Equivalent
10. To verify that firmware updates are in progress, select Action Summary. The
Action Status Summary window appears with information about recent actions,
including their status and overall progress.
A successful update (partial screen) for the Y-fabric of the processor boot code:
11. Update the X-fabric for the processor boot code. From the Filter by list, select the
appropriate filter, Logical:Fabric Side-X.
Note. You can begin this sequence of steps by using Remove All to delete the resources for
the Y-side update. All the steps are the same, except the change filter message is not
displayed and Step 12 is unnecessary.)
VST955vsd