Installation and Upgrade Guide

Updating Processor Boot Code
G06.24 Software Installation and Upgrade Guide—528593-005
8-17
Reset the Processors To Complete Updating the
Processor Boot Code (Both for OSM and TSM)
3. Select the processor(s) that you want to halt.
4. From the Processor Actions list, select Halt.
5. Click Perform action.
6. Monitor status of the halt action. After the halt action has successfully finished, a
completed message appears.
7. From the Processor Actions list, select Hard Reset and click Perform Action. For
example:
8. Reload the processor from the TACL prompt. See Reload the Remaining
Processors (If Necessary) on page 11-6.
9. Repeat all steps for each processor in the system.
Caution. Do not proceed until the Hard Reset action is completed because that could prevent
the update from taking effect.