Installation and Upgrade Guide

Resuming Normal Operations
G06.24 Software Installation and Upgrade Guide—528593-005
12-7
Update ServerNet/FX and ServerNet/FX2 Firmware
(Overview)
To Set a Cluster Number (Using TSM)
1. In the TSM Management window, select the FXSA FRU.
2. Select Display> Actions to display the TSM Actions dialog box.
3. Select Set FOX Cluster Number and then click Perform Action.
4. Select an integer number from 1 through 14 for a new cluster number, making sure
that it is different from the current cluster number.
5. To start the FXSA FRU, click Start and then click Perform Action.
6. When the process is finished, the TSM Action dialog box displays Completed, and
the new cluster number appears in the Attributes box.
For detailed instructions, see the ServerNet/FX Adapter Configuration and
Management Manual.
To Load the FXSA or FX2SA Firmware (Using OSM)
1. Log on to the OSM Service Connection.
2. Select Display>Multi-Resource Actions.
3. In the Multi-Resource Actions dialog box, select FXSA or FX2SA from the
Resource Type list.
4. If any of the FXSA or FX2SA FRUs are down-rev, check the Device State attribute
for those FRUs. If any of them need to be stopped, select Stop from the Action list.
(You can also use SCF to stop FXSA or FX2SA FRUs).
5. Click to highlight (shift-select to highlight multiple) FRUs to be stopped and click
Add to move them to the lower resource list. For example: