Installation and Upgrade Guide

Installing the Latest DSM/SCM SPRs and Client
Software
G06.24 Software Installation and Upgrade Guide—528593-005
B-4
Determine the Product Version of DSM/SCM on the
Host System
Determine the Product Version of DSM/SCM on the Host System
To determine which product version of DSM/SCM is currently installed on your system,
use the VPROC command to determine the product version of TAEXE (Apply product
of DSM/SCM) and CBEXE (Build product of DSM/SCM).
At a TACL prompt, enter:
> volume $dsmscm_vol.ZDSMSCM
> vproc taexe
> vproc cbexe
If your VPROC commands do not display the following versions, install the latest D46
DSM/SCM product version as described in Copy (RESTORE) the D46 DSM/SCM
Product Version and SWID (Optional) to Disk on page B-6:
The following shows the latest D46 product version of DSM/SCM after DSM/SCM has
been activated. (Bold lettering is used to show the vproc command and the latest
version):
$TDSV ZDSMSCM 8> vproc cbexe
VPROC - T9617G03 - (07 AUG 2003) SYSTEM \TINY Date 18 AUG 2004, 13:36:49
Copyright 2003 Hewlett-Packard Development Company, L.P.$TDSV.ZDSMSCM.CBEXE
Binder timestamp: 20APR2004 03:37:46
Version procedure: S7032D20^27FEB04^SWARCCP^AAH
Version procedure: T6031D46_10MAY2004_19APR2004ABJ
Target CPU: UNSPECIFIED
AXCEL timestamp: 20APR2004 03:40:33
$TDSV ZDSMSCM 7> vproc taexe
VPROC - T9617G03 - (07 AUG 2003) SYSTEM \TINY Date 18 AUG 2004, 13:36:39
Copyright 2003 Hewlett-Packard Development Company, L.P.
$TDSV.ZDSMSCM.TAEXE
Binder timestamp: 20APR2004 04:34:37
Version procedure: S7032D20^27FEB04^SWARCCP^AAH
Version procedure: T6031D46_10MAY2004_19APR2004ABJ
Target CPU: UNSPECIFIED
AXCEL timestamp: 20APR2004 04:38:09
Determine the Product Version of DSM/SCM on the Client
To determine which product version of DSM/SCM client software is installed, start the
DSM/SCM Planner Interface. Before prompting you to log on, the About DSM/SCM
window briefly displays version information.
The latest DSM/SCM client version for the G06.24 RVU is: