Installation and Upgrade Guide

ManualsBrandsHP ManualsSoftwareIntegrity NonStop Release and Migration

261

262

263

264

265

266

267

268

269

270

Installing the Latest DSM/SCM SPRs and Client

Software

G06.24 Software Installation and Upgrade Guide—528593-005

B-16

Verify That the D46 Product Version of DSM/SCM Is

Installed

These messages appear:

Because the $ZHOME reliable home-term process is not an interactive process

and is always paused, no action is necessary.

PATHWAY CONTROL FILE DATED: 21 APR 2003, 03:52:16

$Z03N: WARN - *1079* SERVER CB-001, NO STATIC SERVERS DEFINED

$Z03N: WARN - *1079* SERVER IS-001, NO STATIC SERVERS DEFINED

$Z03N: WARN - *1079* SERVER MISERVER, NO STATIC SERVERS DEFINED

$Z03N: SERVER OM-001, STARTED

$Z03N: SERVER SM-001, STARTED

$Z03N: SERVER SM-T-001, STARTED

$Z03N: SERVER T9154-HELP-SERV, STARTED

$Z03N: WARN - *1079* SERVER TA-001, NO STATIC SERVERS DEFINED

$Z03N: WARN - *1079* SERVER TISERVER, NO STATIC SERVERS DEFINED

$Z03N: WARN - *1079* SERVER US-001, NO STATIC SERVERS DEFINED

$Z03N: TCP TCP-H, STARTED

$Z03N: TCP TCP-T, STARTED

2. If necessary, press Enter to have STARTSCM run the PM6031 TACL macro

automatically. This step takes several minutes.

Verify That the D46 Product Version of DSM/SCM Is Installed

To verify that the latest D46 product version of DSM/SCM is currently installed on your

system, use the VPROC command to display the product version of TAEXE (Apply

product of DSM/SCM) and CBEXE (Build product of DSM/SCM). At a TACL prompt,

enter:

> volume $dsmscm_vol.ZDSMSCM

> vproc taexe

> vproc cbexe

The following shows a D46 product version of DSM/SCM after DSM/SCM has been

activated:

8> startscm

DSM/SCM Process Startup Function - STARTSCM - T6031D46 - (31MAR2003)

NOTICE:* If the hometerm chosen during INITENV, $zhome,

* is not currently in a paused state, STARTSCM and DSM/SCM

* server processes may hang indefinitely. Be sure this

* hometerm has been paused!

STARTSCM: A new version of DSM/SCM has been installed and IPM6031 needs to

be run. You can either exit and run IPM6031

manually or continue and IPM6031 will be run for you.

Enter <CR> to continue or BREAK to exit.