Installation and Upgrade Guide

Updating SWAN Concentrator CLIP Firmware
G06.24 Software Installation and Upgrade Guide—528593-005
C-4
Using the SWAN Fast Firmware Update Guided
Procedure (Recommended if Using TSM)
5. In the Select CLIP Collection dialog box, select the CLIPs to be updated:
a. From the Adapter Type list, select either SWAN or SWAN2.
b. Select _All_CLIP_2s_if adapter is SWAN2 or _All_CLIP_s if adapter is
SWAN.
c. From the CLIP List in Selected Collection, select the required CLIPs and click
Add CLIPs.
d. Click Use.
The Select Action dialog box appears.
6. When the Select Action dialog box appears, select the CLIPs whose progress
should be monitored by selecting Activity state options.
The firmware file is automatically selected from $SYSTEM.CSSnn. Leave the
default (blank) if you have installed the new RVU.
7. To access SWAN firmware located in another subvolume, click Specify Other as
shown and type in the correct firmware location and click OK. For example:
vst864.vsd