Installation and Upgrade Guide

Updating SWAN Concentrator CLIP Firmware

G06.24 Software Installation and Upgrade Guide—528593-005

C-16

Step 3: Initiate the Firmware Update Using TSM

1. Log on to the TSM Service Application.

2. Select Display> Firmware update.

The Firmware Update dialog box appears.

3. From the Resource Type list, select SWAN Clip.

4. From the Display list, select All.

The SWAN CLIPs are listed in the Available box:

5. Select all SWAN CLIPs with a current file version that does not match the

T7953AAN version (T7954Vnn^ddmmmyyyy^AAN).

6. Click Add to move the CLIPs to the Selected box.

7. Click Specify other.

The Specify Firmware File Location dialog box appears.

Caution. If you are updating from a pre-T7953AAG firmware version, you must perform a

firmware update for all CLIPs on each SWAN concentrator. The firmware update should be

performed in parallel for a maximum of six SWAN CLIPs for each NonStop TCP/IP pair.

VST425.vsd