Installation and Upgrade Guide

Overview of Installing G06.24
G06.24 Software Installation and Upgrade Guide—528593-005
1-9
Updating Firmware
You must use OSM to update firmware for the HP NonStop Cluster 6780 Switch. For
information on using OSM to update firmware, see the OSM online help.
Table 1-1 lists the updateable firmware for processors, SPs, and SCSI SACs.
Note. When migrating to G06.24 from an RVU prior to G06.08, update SCSI boot code after
the system load. Update SP and processor boot code before performing the system load of
G06.24.
Table 1-1. G06.24 Updateable Firmware for Processors, SPs, and SCSI SACs
Product
Number Description
Host
CRU/FRU
Disk File
Name
Default
Location Mgmt Tool
Related
Information
T0503AAB SCSI boot
code
PMF and
PMF 2
IBOOT SYSnn
subvolume
TSM SA
and LLL
OSM SC
and LLL
Section 11,
Loading the
G06.24
RVU; TSM
or OSM
online help
T1089ABP SP firmware PMF and
PMF 2;
IOMF and
IOMF2
SPCODE9 SYSnn
subvolume
TSM SA
and LLL
OSM SC
and LLL
Section 7,
Updating
Service
Processor
(SP)
Firmware;
TSM or
OSM online
help
T8461AAE NonStop
S7000
processor
firmware
PMF and
PMF 2
CPUCODE8 SYSnn
subvolume
TSM SA
and LLL
OSM SC
and LLL
Section 8,
Updating
Processor
Boot Code;
TSM or
OSM Online
User Guide
T7892ABD NonStop
S70000,
S74000,
S7600,
S7800,
S78000
S8x000
processor
firmware
PMF and
PMF 2
CPUCODE9 SYSnn
subvolume
TSM SA
and LLL
OSM SC
and LLL
Section 8,
Updating
Processor
Boot Code;
TSM or
OSM Online
User Guide