Installation and Upgrade Guide

ManualsBrandsHP ManualsSoftwareIntegrity NonStop Release and Migration

Overview of Installing G06.24

G06.24 Software Installation and Upgrade Guide—528593-005

1-14

Installing a New RVU

Table 1-6. Tasks and Tools for Installing the G06.24 RVU (page 1 of 2)

To Perform This Task... Use This Tool... Documented in...

1. Install a D46 product version

of DSM/SCM and

fallback/interoperability

SPRs. HP recommends that

you install the D46 SPR on

the host and on the client.

You must also install the

SWID product

T9298D40^AAK if you are

running an RVU before

G06.20.

DSM/SCM Planner

Interface

Section 3, Installing SPRs

Before Upgrading to the

G06.24 RVU

Appendix B, Installing the

Latest DSM/SCM SPRs

and Client Software

2. Save the current

configuration file

(CONFxxyy).

Subsystem Control

Facility (SCF)

Section 4, Preparing to

Upgrade the Server

Software

3. Upgrade the system console

to TSM client software

Version 2003A (if necessary).

or upgrade the OSM client-

component software

NonStop System Console

Installer

NonStop System Console

Installer Guide

System Console

Requirements on page 1-1.

4. Receive new G06.24

software into the DSM/SCM

Archive.

DSM/SCM Planner

Interface

Section 5, Installing the

G06.24 RVU

5. Create a new software

revision.

DSM/SCM Planner

Interface

Section 5, Installing the

G06.24 RVU

6. Build and apply the activation

package.

DSM/SCM Planner

Interface

Section 5, Installing the

G06.24 RVU

7. Install and configure the

latest TSM or OSM server

SPRs

DSM/SCM Planner

Interface

See the OSM Migration

Guide or the TSM softdocs.