Installation and Upgrade Guide

Overview of Installing G06.24
G06.24 Software Installation and Upgrade Guide—528593-005
1-32
NonStop Processor Multifunction (PMF) CRUs
(G06.08 through G06.24)
NonStop Processor Multifunction (PMF) CRUs (G06.08 through
G06.24)
If you upgrade to NonStop PMF CRUs while installing G06.24 and have to return to an
RVU prior to G06.24, review Table 1-9 to see if you have to remove PMF CRUs:
Table 1-9. Upgrading to NonStop S-Series CRUs and Falling Back
NonStop PMF CRU RVU Action
S7400 G06.08 S7400 PMF CRUs must be removed; these
PMF CRUs are supported in G06.08 and later
RVUs only.
S74000 G06.08 S74000 PMF CRUs must be removed; these
PMF CRUs are supported in G06.08 and later
RVUs only.
S7600 G06.17 S7600 PMF CRUs must be removed. NonStop
S7600 PMF CRUs are supported for G06.17
and later RVUs only.
S76000 G06.16 S76000 PMF CRUs must be removed.
NonStop S76000 PMF CRUs are supported
for G06.16 and later RVUs only.
S86000 G06.16 S86000 PMF CRUs must be removed.
NonStop S86000 PMF CRUs are supported
for G06.16 and later RVUs only.
S7800 G06.23 S7800 CRUs must be removed. NonStop
S7800 CRUs are supported for G06.16 and
later RVUs only. The correct OSM or TSM
SPRs (for instance, TSM T7945ABL or later)
must be installed. See the Interactive Upgrade
Guide for details.
S78000 G06.24 S78000 CRUs must be removed. NonStop
S78000 CRUs are supported for G06.16 and
later RVUs only. The correct OSM or TSM
SPRs (for instance, TSM T7945ABN or later)
must be installed. See the Interactive Upgrade
Guide for details.
S88000 G06.24 S88000 CRUs must be removed. NonStop
S88000 CRUs are supported for G06.24 and
later RVUs only. See the Interactive Upgrade
Guide for details.