Installation and Upgrade Guide

Installing SPRs Before Upgrading to the G06.24

RVU

G06.24 Software Installation and Upgrade Guide—528593-005

3-3

Summary of the SPR Installation Procedure

1. Use Scout to verify that you can apply the DSM/SCM SPR to your current G-series

RVU.

2. Use DSM/SCM to install the required SPRs. For detailed instructions, see

Appendix A, Using DSM/SCM to Install SPRs.

3. If necessary, use TSM to update firmware (DSM/SCM notifies you if firmware

needs updating).

4. If needed, use the Install^Templates macro located in the TACLMACS file to install

EMS template object files from SPRs on a running system if SYSGEN and system

load are not required. This macro uses SCF.

5. Run ZPHIRNM.

6. Perform a system load if SYSGEN is required.

For DSM/SCM D46 and OSM SPRs, different instructions apply.

D46 SPR of DSM/SCM

The T6031D46 product version update (PVU) requires that you install both the client

and the server-side version to manage OSS files. HP always recommends that you

upgrade to the newest software product revision (SPR) of DSM/SCM. Apply the

T6031D46^ABJ SPR of DSM/SCM before receiving the G06.24 SUT.

After you activate the T6031D46 ABJ or later server software, the ZDSMEXE file will

be available to download from the ZDSMSCM subvolume so that you can update the

client. (You do not need to update the DSM/SCM client to the D46 server side

immediately to receive the G06.24 RVU successfully.)

However, HP recommends that, for your production environment, both the client and

server side of DSM/SCM PVUs match.

Appendix B, Installing the Latest DSM/SCM SPRs and Client Software contains

instructions for installing a D46 SPR of DSM/SCM, including the client.

Caution. Failure to install a D30 or later DSM/SCM product version causes G05.00 and later

shared run-time libraries (SRL) products to be installed incorrectly. Incorrectly installed SRLs

cause major system problems and prevent successful upgrades to new RVUs.

You must install the D46 client version of DSM/SCM to activate DSM/SCM management of

OSS files for a target.