Installation and Upgrade Guide

Contents

G06.24 Software Installation and Upgrade Guide—528593-005

11. Loading the G06.24 RVU

Alerts 11-1

Halt the Processors 11-2

Replace Processor or Other System CRUs 11-3

System Load Using the TSM or OSM

Low-Level Link 11-4

Reload the Remaining Processors (If Necessary) 11-6

Check the Status of the Processors 11-7

Recovery Operations for System Load 11-7

Performing a System Load From the Mirror System Disk 11-7

The Reset Operation 11-8

12. Resuming Normal Operations

Update TCP/IP Configuration Files 12-1

Step 1: Copy the Sample TCP/IP Files into $SYSTEM.ZTCPIP (Optional) 12-1

Step 2: Check the PROTOCOL File 12-2

Step 3: Ensure That PORTCONF and SERVICES Files Are Complete 12-3

Reconfigure System Console Applications 12-4

Using TSM to Reconfigure Primary and Backup Dial-Out Points 12-4

Using TSM to Reconfigure Your Site Contact Information 12-4

Using OSM (If Installed) to Reconfigure Site Contact Information and Backup Dial-

Out Points 12-4

Check Processor Status (Using TSM or OSM) 12-4

Perform Other Firmware Updates 12-5

Update SWAN and SWAN 2 CLIP Firmware 12-5

Update NonStop ServerNet Switch Firmware 12-5

Update ServerNet Adapter Firmware 12-5

Update ServerNet/FX and ServerNet/FX2 Firmware (Overview) 12-6

Configure the Spooler 12-9

Start User and System Applications 12-10

Before Starting DSM/SCM 12-10

Start DSM/SCM 12-11

Reset and Start the Mirror System Disk (If Necessary) 12-11

Configure Specific Products (Post-System Load) 12-12

Configure Expand and New Profiles 12-12

Configure OSS 12-13

Configure SMF (Optional) 12-14

Configure the Remote Duplicate Database Facility (RDF) 12-15

Upgrade the WAN Manager (T8365), (Optional) 12-15