Instruction Manual

ManualsBrandsHP ManualsComputer HardwareIntegrity Superdome 2 Server

101

102

103

104

105

106

107

108

109

110

• Enclosure Event 0x07: Administrator Rights Changed

• Enclosure Event 0x08: Enclosure Shutdown Pending

• Enclosure Event 0x09: Enclosure Topology Changed

• Enclosure Event 0x10: Fan Status Changed

• Enclosure Event 0x11: Fan Inserted

• Enclosure Event 0x12: Fan Removed

• Enclosure Event 0x14: Thermal Subsystem Redundancy Status Changed

• Enclosure Event 0x15: Fan at Max Percentage

• Enclosure Event 0x16: Add Fan to Bay

• Enclosure Event 0x17: Remove Fan from Bay

• Enclosure Event 0x18: Fan Over Consuming Power

• Enclosure Event 0x20: Thermal Status Changed

• Enclosure Event 0x30: Power Supply Status Changed

• Enclosure Event 0x31: Power Supply Inserted

• Enclosure Event 0x32: Power Supply Removed

• Enclosure Event 0x33: Power Supply Subsystem Redundant Status Changed

• Enclosure Event 0x34: Power Supply Subsystem Overloaded

• Enclosure Event 0x35: AC Failure

• Enclosure Event 0x36: Inadequate Power or Cooling

• Enclosure Event 0x40: Interconnect Device Status Changed

• Enclosure Event 0x41: Interconnect Device Reset

• Enclosure Event 0x42: Interconnect Device UID Status Changed

• Enclosure Event 0x43: Interconnect Device Inserted

• Enclosure Event 0x44: Interconnect Device Removed

• Enclosure Event 0x45: Interconnect Device Information Changed

• Enclosure Event 0x46: Interconnect Device Health LED Status Changed

• Enclosure Event 0x47: Interconnect Device Thermal Status Changed

• Enclosure Event 0x48: Interconnect Device CPU Fault

• Enclosure Event 0x49: Interconnect Device Power Mode Changed

• Enclosure Event 0x50: Enclosure Demonstration Mode

• Blade Event 0x100: Blade Device Status Changed

• Blade Event 0x101: Blade Device Inserted

• Blade Event 0x102: Blade Device Removed

• Blade Event 0x103: Blade Device Power State Changed

• Blade Event 0x104: Blade Device Power Management Changed

• Blade Event 0x105: Blade Device UID Status Changed

• Blade Event 0x106: Blade Device Shutdown

• Blade Event 0x107: Blade Device Fault

• Blade Event 0x108: Blade Device Thermal Status Change

Onboard Administrator Module 107