User's Guide

12 Novell NetWare Networks (Windows 3.1 Client)
EN
Use the HP JetAdmin Software to Configure the Print
Server
1. Log onto the network with Supervisor privileges.
2. Double-click the
HP JetAdmin
icon in the
HP JetAdmin
Utilities
group.
3. The following message may be displayed: “JetAdmin could not
find any configured devices on your network. Do you want to
configure one now?” Click
Yes
and go to Step 5. (If this message
is not displayed, go to Step 4.)
Note If your printer does not appear in the list of
available printers, select a refresh option from the
Device Refresh
pull-down menu.
4. If the
HP JetAdmin Utility
screen is displayed, select a refresh
option from the
Device Refresh
pull-down menu to refresh the
HP JetAdmin Utility screen. All configured print servers are
displayed. Now, select
Device
,
New
.
5. On the
Network Browser
screen, highlight the hardware address
of your print server. (The 12-character hardware address is on
the configuration page or on the bottom of the external
print server.)
6. Click
Configure
. The
General
screen is displayed.
7. Type the name of the print server and a description (optional);
then click
Next
. The
NetWare
screen is displayed.
8. Click
Operating Mode
and select
Queue Server Mode
.