User's Guide

14 Novell NetWare Networks (Windows 3.1 Client)

Configuring a Printer in Queue

Server Mode (Bindery)

You can configure a printer in queue server mode on a NetWare 3.x

and 4.x (Bindery) network. This mode supports 16 file servers and

64 print queues per HP JetDirect print server port. This mode also

prevents other printers from accessing data sent to the configured

queue(s) without SUPERVISOR’s intervention.

Before you configure the HP JetAdmin software, make sure the

following tasks have been performed:

●

Internal print servers: The print server is installed in the printer

and the printer is connected to a network.

●

External print servers: The print server has power and is

connected to the printer’s parallel port and network.

●

The printer is turned on, is online, and you have printed a

configuration page.

If you have not printed an HP JetDirect configuration page from

your printer, see the hardware installation guide for your

HP JetDirect print server or your printer’s getting started guide for

instructions.

Note If you are servicing NDS and Bindery queues on the

same file servers, the HP JetDirect print server will

log onto the server twice, taking two user licenses.