User's Guide

Novell NetWare Networks (Windows 3.1 Client) 17

Configuring a Printer in Remote

Printer Mode (Bindery)

You can configure a printer in remote printer mode on a NetWare

3.x and 4.x (Bindery) network. Remote Printer mode requires a

Novell NetWare print server, but allows implementation of forms

and provides the best integration with NetWare print utilities (for

example, PCONSOLE or NWADMIN). Using PSERVER.EXE, the

print server consumes one user license for all printers. Using

PSERVER.NLM, the print server does not consume any license

slots.

Before you configure the HP JetAdmin software, make sure the

following tasks have been performed:

●

Internal print servers: The print server is installed in the printer

and the printer is connected to a network.

●

External print servers: The print server has power and is

connected to the printer’s parallel port and network.

●

The printer is turned on, is online, and you have printed a

configuration page.

If you have not printed an HP JetDirect configuration page from

your printer, see the hardware installation guide for your print

server or your printer’s getting started guide for instructions.

To Configure the Printer

1. Log onto the network with Supervisor privileges.