User's Guide

18 Novell NetWare Networks (Windows 3.1 Client)
EN
2. Run PCONSOLE and create or modify your selected Novell
print server.
■
Configure a printer slot with
Type Remote
,
Other Unknown
(or
Other Unknown
in 4.x).
■
Assign a print queue to the printer slot (printer number).
■
Restart your print server at the server console by typing
UNLOAD PSERVER and the name of your print server.
■
Type LOAD PSERVER and the same print server name.
3. Double-click the
HP JetAdmin
icon in the
HP JetAdmin
Utilities
group.
4. To change an existing printer configuration, highlight the
printer you want in the list of printers.
Note If your printer does not appear in the list of
available printers, select a refresh option from the
Device Refresh
pull-down menu.
5. Click
Device
on the menu bar at the top of the main window,
then do one of the following:
■
Click
New
to configure a new printer.
- or -
■
Click
Modify
to configure an existing printer.
6. If you are configuring a new printer, select the LAN hardware
address of the HP JetDirect print server attached to the new
printer, then click
Configure
. The address of the HP JetDirect
print server is listed on the HP JetDirect configuration page.
7. Type the new name of the printer that was created in Step 2.
This is the name that will appear on the network.