User's Guide

EN
Novell NetWare Networks (Windows 9x & NT/2000 Client) 35
6. If you are configuring a new printer, select the LAN hardware
address of the HP JetDirect print server attached to the new
printer, then click
Configure
. The address of the HP JetDirect
print server is listed on the HP JetDirect configuration page.
7. Type the new name of the printer. This is the name that will
appear on the network.
8. Type a general description of the printer such as the type of
printer, options in the printer, and printer location. This
description is optional.
9. Click
Next
. The
NetWare
screen will display.
10. Click
Operation Mode
, then select
Remote Printer
.
11. Select the print server’s name in the
Novell Print Server
box.
12. Select the printer number (assigned in PCONSOLE in step 2)
in the
Printer Number
box.
13. Click
Queues
.
To add or remove queues from the list, click
Change
, add or
remove queues for the printer, then click
OK
. At least one queue
must appear in the list of Queues Serviced.
14. If desired, click
Notification
to view the users or groups to be
notified of problems with this printer.
Click
Next
. The
TCP/IP
screen is displayed.
Changing the TCP/IP settings is optional. When completed,
click
Next
.
15. Click
Finish
.
When asked to save the new device configuration, click
OK
.
Then return to the
HP JetAdmin Utility
screen and verify that
the new device was added.
To verify the configuration, see the next section, “Verifying the
Configuration.”