User's Guide

EN
Microsoft Windows 95/98 Networks (Peer-to-Peer) 43
To Configure the Printer
1. Click Start, Programs, HP JetAdmin Utilities, then click
HP JetAdmin.
2. Click Device on the menu bar at the top of the main window,
then do one of the following:
■
Click New to configure a new printer.
- or -
■
To change an existing printer configuration, highlight the
printer you want in the list of printers in the main window,
then click Device, Modify.
Note If your printer does not appear in the list of
available printers, select a refresh option from the
Device Refresh
pull-down menu.
3. If you are configuring a new printer, select the LAN hardware
address of the HP JetDirect print server attached to the new
printer, then click Configure. The address of the HP JetDirect
print server is listed on the HP JetDirect configuration page.
4. If you are using IPX/SPX, type the name of the printer. This is
the name that will appear on the network (for example,
LJ5_floor2
).
5. Type a general description of the printer (such as the type of
printer, options in the printer, and the printer location). This
description is optional.
6. Click Next to display the
TCP/IP
properties page.