User's Guide

44 Microsoft Windows 95/98 Networks (Peer-to-Peer)
EN
7. If you are using TCP/IP, select one of the following. Otherwise,
skip to Step 9.
■
Automatically obtain TCP/IP configuration from the
DHCP server
■
Automatically obtain TCP/IP configuration from the
BOOTP server
■
Manually specify TCP/IP configuration
8. If you selected
Manually specify TCP/IP configuration
,
then do the following:
■
Type the TCP/IP Address
■
Type the Subnet Mask
■
Type the Default Gateway
9. Click
Next
to display the
Optional
properties page.
10. If desired, click
Password
, then click the
Enable
configuration password
box. If you do not want to enable a
configuration password, go to step 11.
■
If a password is not currently specified, click the
New
Password
box and type a password of up to 12 characters.
The password can be any combination of characters on your
keyboard.
■
If you are changing the current password, click the
Current
Password
box and type the current password, then click the
New Password
box and type a new password of up to
12 characters. The password can be any combination
of characters.
11. Click
Finish
, then click
OK
to complete the configuration.
12. To verify that the configuration is working properly, see the next
section “Verifying the Configuration.”