User's Guide

52 Microsoft Windows NT/2000 Networks (TCP/IP or IPX/SPX)
EN
Configuring a New or Existing
Printer
You can use HP JetAdmin to configure a printer that was not
automatically configured during the CD-ROM software
installation. Before you configure the HP JetAdmin software, make
sure the following tasks have been performed:
●
Internal print servers: The print server is installed in the printer
and the printer is connected to a network.
●
External print servers: The print server has power and is
connected to the printer’s parallel port and network.
●
The printer is turned on, is online, and you have printed a
JetDirect configuration page.
If you have not printed a configuration page from your printer, see
the hardware installation guide for your print server or your
printer’s getting started guide for instructions.
To Configure the Printer
1. Log onto the network with Supervisor privileges.
2. Run HP JetAdmin.
3. Click
Device
on the menu bar at the top of the main window,
then do one of the following:
■
Click
New
to configure a new printer.
- or -
■
To change an existing printer configuration, highlight the
printer you want in the list of printers in the main window,
then click
Device
,
Modify
.
Note If your printer does not appear in the list of
available printers, select a refresh option from the
Device Refresh
pull-down menu.