User's Guide

EN
Microsoft Windows NT/2000 Networks (TCP/IP or IPX/SPX) 53
4. If you are configuring a new printer, select the LAN hardware
address of the HP JetDirect print server attached to the new
printer, then click
Configure
. The address of the HP JetDirect
print server is listed on the HP JetDirect configuration page.
5. If you are using IPX/SPX, type the name of the printer. This is
the name that will appear on the network (for example,
LJ5_floor2
). (If your printer does not appear in the list of
available printers, select a refresh option from the
Device
Refresh
pull-down menu.)
6. Type a general description of the printer (such as the type of
printer, options in the printer, and the printer location). This
description is optional.
7. Click
Next
to display the
TCP/IP
properties page.
8. If you are using TCP/IP, select one of the following. Otherwise,
skip to step 10.
■
Automatically obtain TCP/IP configuration from the DHCP
server
■
Automatically obtain TCP/IP configuration from the BOOTP
server
■
Manually specify TCP/IP configuration
9. If you selected
Manually specify TCP/IP configuration
,
then do the following:
■
Type the TCP/IP Address
■
Type the Subnet Mask
■
Type the Default Gateway
10. Click
Next
to display the
Optional
properties page.