User's Guide

56 Microsoft Windows NT/2000 Networks (TCP/IP or IPX/SPX)
EN
9. Type the name of the port and click
Next
. The name must not
be the name of an existing port, such as LPT1, or an existing
DOS device.
10. If a password is not currently specified, click the
New
Password
box and type a password of up to 12 characters.
The password can be any combination of characters on your
keyboard.
11. If you are changing the current password, click the
Current Password
box and type the current password, then
click the
New Password
box and type a new password of up to
12 characters. The password can be any combination of
characters on your keyboard.
Note After you enable a configuration password, you will
be asked to type the password when you attempt to
configure devices in the future. If you do not type
the correct password, access will be denied. Once
the correct password is typed, you will not be asked
for the password again from that workstation.
12. Click
Finish
.
13. To share the printer with other users on the network, click the
Share This Printer on the Network
box.
14. Click
OK
to create the printer.
15. Click
OK
on the
Printer Setup
screen.
The printer you have just set up can be accessed from the local
computer at this time. If you shared the printer, the printer can also
be accessed from client computers.