User's Guide

EN
UNIX (HP-UX and Solaris) Networks 63
●
Monitor the progress of print jobs when printing to an HP printer
connected by an HP JetDirect print server.
●
Receive notification on supported printers when the last page of
a print job has exited into the printer’s output bin (if the printer
supports true end-of-job and if true end-of-job is turned on).
See the online help and the README files for more information on
HP JetAdmin software.
Installation and Configuration Requirements
Before you install the HP JetAdmin software, make sure you have
the following:
●
HP JetAdmin for UNIX, version D.06.21.
●
System administrator (root) access to your system.
●
The LAN hardware address (or station address) of the print
server. This address is printed with print server status
information on the configuration page and is similar to the
following:
■
Ethernet:
LAN HW ADDRESS: AD: 080009xxxxxx
- or
- 0060B0xxxxxx
■
Token Ring:
LAN HW ADDRESS: TR: xxxxxxxxxxxx
●
At least 10 MB free disk space on your system.
If you have not printed a configuration page from your printer, see
the hardware installation guide for your print server or your
printer’s getting started guide for instructions.