User's Guide

68 UNIX (HP-UX and Solaris) Networks

6. Before the software shuts down the spooler to make

configuration changes, it prompts you for confirmation. Press

[Enter]

for the HP JetAdmin software to shut down the spooler.

7. At the prompt, press

[Enter]

to display the configuration menu.

The printer should now be configured in your HP-UX or Solaris

spooling system.

Modifying the Existing Network Print Queue from

the Local Spooler

You can modify the existing network spool queue using the

HP JetAdmin software.

1. Run the HP JetAdmin software. Type:

/opt/hpnp/bin/jetadmin

2. Select Configuration from the

Main

menu. The

HP JetAdmin

for UNIX Configuration

menu appears.

3. Select Modify existing spooler queue(s) from the software’s

configuration menu.

4. Type the name of the queue you want to modify.

5. When the HP JetAdmin software displays a list of configurable

parameters, change the parameters you want to change, then

select 0 (zero).

CAUTION In the Solaris environment, do not use Print

Manager to modify any queue created by the

HP JetAdmin software. Using Print Manager

makes all network queues configured by the

HP JetAdmin software unusable.