User's Guide

EN
HP JetAdmin Printer Management Software 3
●
Install and associate Windows printer drivers with a network
printer.
●
Configure locally administered address for Token Ring.
●
For TCP/IP, select the IP address, default gateway, and subnet
mask.
●
Verify printer status and capabilities.
●
Remotely assign printer default settings including media type,
number of copies, page orientation, printer resolution, Resolution
Enhancement (REt), print density, and more.
●
Control printer error handling including PostScript
Jam Recovery, Clearable Warnings, and Auto Continue.
●
Lock out the printer control panel or enable password protection.
●
View network diagnostic information.
●
Configure the HP JetDirect print server including frame types,
protocol stacks, time intervals, and error notification.
●
Reset the HP JetDirect print server.
●
Create shared printers on the server.
End User Features
●
View and delete your own print jobs.
●
Install Windows drivers automatically on computers.
●
View printer status.
●
Set up a default printing queue for all of your Windows
applications.
For more information about a procedure or window in the
HP JetAdmin software, click Help.
Note To make printer configuration easier, HP JetAdmin
offers Interview Mode, which uses the Next button
to guide you through the configuration process.
Interview Mode is selected as the default when the
software is installed, and the instructions in this
manual assume that Interview Mode is turned on.
Software and Memory Requirements
For the most current information on software and memory
requirements, see the HP JetAdmin README file.