Owner manual

5. If you have already placed the document on the flatbed scanner, press OK (or place the document
on the flatbed scanner and then press OK).
After scanning the page, Another page? 1=Yes 2=No appear on the control-panel display.
6. If you have more pages to scan, press 1 to select Yes, and then repeat step 5 for each page of the
fax job.
-or-
If you are finished, press 2 to select No.
The product scans the document into memory and sends the fax to each number specified. If a number
in the group is busy or does not answer, the product redials the number based on its redial setting. If all
redial attempts fail, the product updates the fax activity log with the error and proceeds to the next
number in the group.
120 Chapter 10 Fax ENWW