Owner manual

Control-panel menus
Use the control-panel menus
To gain access to the control-panel menus, use the following steps.
1.
Press Setup (
).
2. Use the arrow buttons to navigate the listings.
●
Press OK to select the appropriate option.
●
Press Cancel to cancel an action or return to the Ready state.
Control-panel main menus
These menus are available from the control-panel main menu:
●
Use the Fax Job status menu (fax models only) to display a list of all faxes that are waiting to be
sent, or have been received but are waiting to be printed, forwarded, or uploaded to the computer.
●
Use the Fax functions menu (fax models only) to configure fax functions such as scheduling a
delayed fax, cancelling the Receive to PC mode, reprinting faxes that were previously printed, or
deleting faxes that are stored in memory.
●
Use the Copy setup menu to configure basic copy default settings such as contrast, collation, or
the number of copies printed.
●
Use the Reports menu to print reports that provide information about the product.
●
Use the Fax setup menu (fax models only) to configure the fax phone book, the outgoing and
incoming fax options, and the basic settings for all faxes.
●
Use the System setup menu to establish basic product settings such as language, print quality,
or volume levels (fax models only).
●
Use the Network config menu to configure network settings such as TCP/IP configuration.
●
Use the Service menu to restore default settings, clean the product, and activate special modes
that affect print output.
NOTE: To print a detailed list of the entire control-panel menu and its structure, print a menu map.
See
Information pages on page 140.
Table 2-1 Fax Job status menu (fax models only)
Menu item Description
Fax Job status Displays pending fax jobs, and allows you to cancel pending fax jobs.
Table 2-2 Fax functions menu (fax models only)
Menu item Description
Send fax later Allows a fax to be sent at a later time and date.
Stop Recv to PC Disables the Receive to PC setting that allows a computer to upload all current faxes that have
not been printed and all future faxes received by the product.
ENWW Control-panel menus 11