Owner manual
42 Using the TV
YPbPr Mode
Adjusting the Volume
Press the (+) or (–) VOL buttons on the remote control to increase or decrease the volume.
YPbPr Operation
1 Press the ENTER button on the remote control to display the following On Screen Display (OSD)
menu items: Image Page, OSD Page, Audio Page, PIP/PAP Page, and Factory Page. (Press the
Exit key to return one level back in the OSD menu.)
2 Press the Up and Down arrow buttons to move up and down the Page icons. Press the ENTER
button when you arrive at your selection.
3 Use the Up and Down arrow buttons to highlight a function.
4 Press the Left or Right arrow buttons to either scroll through the options of a specific function or
view the submenu.
5 Press the Exit button to save your change and return to the OSD menu.
Factory Page
1 Press the ENTER button on the remote control to bring up the OSD menu.
2 Press the Down arrow button four times to highlight the Factory Page icon, and then press ENTER.
3 Use the Up and Down arrow buttons to highlight a setting and press ENTER.
4 Press the Left and Right arrow buttons to scroll through your options.
5 Press the Up and Down arrow buttons to select other settings on the Factory Page.
Or
Press the EXIT button to save the setting and return to the OSD menu.
6 Press the Exit button to remove the OSD menu from your display.
You can make the following adjustments in the Factory Page:
Factory Page Function Options
Sleep Timer Select the number of minutes
you would like the display to
power off.
• Off
• 30 Minutes
• 60 Minutes
• 90 Minutes
• 120 Minutes
Aspect Select the display ratio for your
screen.
• Normal
• 4:3
• Panorama
Noise Reduce Enhances quality of standard
definition, off air media, and
standard definition video.
• Off
• Weak
• Medium
• Strong
Recall Default Puts all of your settings back to
their default.
Left arrow button resets all settings to their default.