User's Manual

HP StoreVirtual CLI| Commands| 49

Example

cliq discoverTCP groupOrder=1 node=10.1.2.3;10.1.2.4

discoverUdp

This command discovers storage systems and management groups on the network, using UDP.

Availability: Windows, SSH

Version: 8.0

Request Syntax

cliq discoverUdp ipMask= ipSubnet=

ipMask Required An IP adderss mask for SNMP notification.

ipSubnet Required An IP Address subnet for SNMP notification.

groupOrder Optional Return storage systems ordered by group membership. This can be one

of: 0 - default, 1

receivePort Optional The TCP port to receive the discovery packets (defaults to an unused

port if unspecified)

waitForData Optional The number of milliseconds to wait for the discovery packets (defaults to

3000 if unspecified)

Example

cliq discoverUdp ipMask=255.255.240.0 ipSubnet=10.0.0.0

dismountVolume

This command dismounts the volume.

Availability: Windows, SSH

Version: 8.0

Request Syntax

cliq dismountVolume mountPoint=

mountPoint Required The drive letter or mount point on the host for the volume (LUN will be

uninitialized if not specified)

Example

cliq dismountVolume mountPoint=5