User's Manual
86| HP StoreVirtual CLI| Commands
removeSnapshot
This command disconnects a SAN snapshot from the host, then deletes it. If the snapshot cannot be
disconnected (because it's in use, or for any other reason), it will not be deleted.
Availability: Windows
Version: 8.5
Request Syntax
cliq removeSnapshot snapshotName= login= userName= passWord=
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
userName Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
passWord Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
groupName Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
snapshotName Required The name of the remote snapshot
Example
cliq removeSnapshot snapshotName=z: login=10.0.1.2 userName=admin
passWord=secret
removeVolume
This command disconnects a SAN volume from the host, then deletes it. If the volume cannot be disconnected
(because it's in use, or for any other reason), it will not be deleted.
Availability: Windows
Version: 8.0
Request Syntax
cliq removeVolume volumeName= login= userName= passWord=
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
userName Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
passWord Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
groupName Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
volumeName Required The name of the volume
Example
cliq removeVolume volumeName=z: login=10.0.1.2 userName=admin
passWord=secret