User's Manual

90| HP StoreVirtual CLI| Commands
setAutoMountPolicy
This command sets the auto-mount policy for the HP StoreVirtual Recovery Manager application on this
computer.
Availability: Windows
Version: 10.0
Warnings
The HP StoreVirtual Recovery Manager must be installed on the system to implement automount
polices defined by the CLIQ. When running the command, if no groupName parameter is
supplied, default credentials will be modified.
Request Syntax
cliq setAutoMountPolicy groupName= volumeName=
retentioncount= mountpoint=
paused=
groupName Optional The name of the management group
volumeName Optional The name of the volume
retentioncount Optional The retention count.
mountPoint Optional The mount point.
paused Optional State of the snapshot schedule. This can be one of: 0 - schedule is not
paused, 1 - schedule is paused
Example
cliq setAutoMountPolicy
cliq setAutoMountPolicy
setDnsInfo
This command sets information for DNS.
Availability: Windows, SSH
Version: 8.0
Request Syntax
cliq setDnsInfo login= userName= passWord= server= suffix= domainname=
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
userName Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
passWord Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
groupName Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
domainname Optional The domain name.
suffix Optional DNS suffixes.