Software Instruction Manual

Advanced topics 18
if errorlevel 1 GOTO NEXT2
%Tools%\ACU\bin\hpacuscripting.exe -i
%GlobalData%\ArraySettings\pl-r1.ini
GOTO NEXT5
:NEXT2
%Tools%\System\ifhw hpdiscovery.xml %Tools%\System\allboards.xml
PCI:"Smart Array 5312"
if errorlevel 1 GOTO NEXT3
%Tools%\ACU\bin\hpacuscripting.exe -i
%GlobalData%\ArraySettings\pl-r1.ini
GOTO NEXT5
:NEXT3
%Tools%\System\ifhw hpdiscovery.xml %Tools%\System\allboards.xml
PCI:"Smart Array 640X Controller"
if errorlevel 1 GOTO NEXT4
%Tools%\ACU\bin\hpacuscripting.exe -i
%GlobalData%\ArraySettings\pl-r5.ini
GOTO NEXT5
:NEXT4
%Tools%\System\ifhw hpdiscovery.xml %Tools%\System\allboards.xml
PCI:"Smart Array P600 Controller"
if errorlevel 1 GOTO NEXT5
%Tools%\ACU\bin\hpacuscripting.exe -i
%GlobalData%\ArraySettings\pl-r5.ini
GOTO NEXT5
:NEXT5
REM pause
REM===============================================================
REM *** Configure the iLO if iLo Present
REM *** echo configuring iLO is present
REM===============================================================
rem %Tools%\System\ifhw hpdiscovery.xml
%Tools%\System\allboards.xml PCI:"Integrated Lights-Out Controller"
rem if errorlevel 1 GOTO State2
rem .\iLo\hponcfg -f %GlobalData%\iLoSettings\iloconfig.xml
REM===============================================================
echo Setting state information before reboot
REM===============================================================
%Tools%\System\statemgr /w Phase 2