Software Instruction Manual

Toolkit utilities 43

Array = A|B|C|D|E|F|G|...Z|a|b|c|d|e|f

OnlineSpare = None | N | Port:ID,Port:ID... | Box:Bay,Box:Bay... |

Port:Box:Bay,Port:Box:Bay,... ; COMMENT: These values are available only

in Custom method mode. In Auto method mode, the choices are Yes|No.

Drive = * | N | Port:ID,Port:ID... | Box:Bay,Box:Bay... |

Port:Box:Bay,Port:Box:Bay,...

DriveType = SCSI | SAS | SATA

LogicalDrive = 1|2|3|...32

RAID = 0|1|5|50|6|60|adg|auto ; COMMENT: RAID 6 and 60 are only available

when SAAP is installed and the license key registered

ParityGroups = 2|N ; COMMENT: Necessary only for RAID 50 or 60. N > 2

Size = [N]|Max

Sectors = 32|63

StripeSize = 8|16|32|64|128|256

ArrayAccelerator = Enable|Disable

LogicalDriveSSPState = Enable|Disable

SSPAdaptersWithAccess = [N],[N]...|None

PreferredPath = 1|2

HBA_WW_ID = WWN

ConnectionName = UserDefinedName

| Solaris | Netware | HP | Windows Sp2 ; COMMENT: The Windows(degrade

value must be entered as written.

Script file options

Options in ACU script files are divided into the following categories:

• Control category (on page 44)

• Controller category (on page 45)

• Array category (on page 48)

• Logical Drive category (on page 49)

• HBA category (on page 52)

Each category has several scripting options, but you do not always need to assign values to every option.

ACU can use default values in some instances, while in other instances, a listed option might not be

relevant for a particular configuration or scripting mode.

The options for each category are listed in the following table and described in more detail in the

remainder of this section.