Software Instruction Manual

Toolkit utilities 53
• Microsoft® Windows®
• OpenVMS
• Tru64
• Linux
• Solaris
• Netware
• HP-UX
ACU scripting error messages
Error code Error message Comment or clarification
1 General error.
The ACU process cannot be initiated. You might see this error
message if you are not authenticated to use ACU or if ACU is
already running.
268 Error saving controller. ACU cannot save one or more controller configurations.
278-282
Controller is locked by
another machine or user.
—
290
Error communicating with
controller.
—
516 Internal error.
An error occurred during the configuration process, but ACU
cannot identify the error because there is an internal ACU
error.
1052
Array requires an odd
number of drives.
This error message occurs if you attempt to add an odd
number of drives to an array that has RAID 1 logical drives,
and the controller does not support RAID-level migration.
1053
Cannot remove physical
drives from existing array.
This error message occurs if a script that is running in
Reconfigure action mode lists fewer physical drives than
already exist in the array. ACU interprets this script as a
request to remove physical drives from an existing array, but
satisfying this request causes data loss, so ACU prevents the
script from running.
1065-1066
Too many coinciding
expansion, migration, or
extension operations.
ACU does not support multiple simultaneous expansions,
migrations, or extensions without saving the configuration
between operations. Limit the number of such configuration
changes in the script.
1091
Controller does not support
SSP.
—
1093
Controller requires physical
drives to set license keys.
—
1102
Slot information is not
available.
You cannot run a script in Input mode on internal controllers
that do not have slot information online. Systems running
Microsoft®
Windows® must have the System Management
Driver loaded.
1110
Controller does not support
license keys.
—
1111 Invalid license key. —